| BTS-60V5A Battery tester |
| Model Number: | BTS- | 60 | V | 5 | A | Battery tester | Material code: | CT-4016 | -60V5A | - | NTA | - | P |
| items | Parameter |
| Input power | AC 380V ±10% / 60Hz |
| Input active power | 6278 | W |
| resolution ratio | AD:16bit；DA:16bit |
| Input impedance | ≥100kΩ |
| voltage | Constant voltage range | 0.3V~60V |
| Minimum discharge voltage | 3V |
| accuracy | ± 0.1% of FS |
| stability | ± 0.1% of FS |
| current | Output range/channel | 0.025A~5A |
| accuracy | ± 0.1% of FS |
| Constant voltage cut-off current | 0.01A |
| stability | ± 0.1% of FS |
| Power | Output range/channel | 300W |
| stability | ±0.2% of FS |
| time | Current response time | maximum current rising time20ms |
| working step time range | ≤(365*24)h/working step | | | | | | |
| Data record | Record data conditions | Minimum time interval:100ms |
| Minimum voltage interval:120mV |
| Minimum current interval:10mA |
| Record frequency | 10Hz |
| Charge | Charge mode | constant-current charge,constant-voltage charge,constant voltage and current charge |
| cut-off conditions | Voltage,current,relative time,capacity,-△V |
| discharge | Discharge mode | constant current discharge, constant watt discharge |
| cut-off conditions | Voltage,current,relative time,capacity,-△V |
| Impulse mode | Charge | Constant current,Constant power |
| Discharge | Constant current,Constant power |
| Minimum impulse width | 500ms |
| Number of pulses | one single pulse working step can support 32 different pulses |
| Continuous switch of charge and discharge | one pulse working step can continuously switch from charge to discharge |
| cut-off conditions | Voltage,relative time |
| DCIR test | Support customized picking up point to perform DCIR calculation |
| | |
| cycle | Loop test range | 1~65535 times |
| Single cycle working steps | 254 |
| Loop nest | Nested loop function,max 3 layers |
| Protection | ● Data Protection |
| ● off-line test |
| ● security conditions can be set including voltage upper/lower limit,current upper/lower limit and delay time |
| ●anti reverse connection |
| IP Protection Class | IP20 |
| Channel feature | constant current and voltage source ;double closed-loop; |
| Channel control mode | independent |
| Current/voltage detection sampling | four-wire connection |
| noise | <85dB |
| data base | MySQL centralized management of test datas |
| upper computer communication mode | TCP/IP |
| Server disk Configuration | 500GB |
| Data output mode | EXCEL 2003,2010,TXT |
| Server operating system | Windows 7 |
| communication interface | ethernet |
| Working environment requirement |
| item | parameter |
| working temp. range | 0℃~40℃(within25±10℃,ensured accuracy:precision drift0.005% of FS /℃) |
| Storage temp. range | -10℃~50℃ |
| Working environment relative humidity range | ≤70% RH(no water vapor condensation) |
| Storage environment relative humidity range | ≤80% RH(no water vapor condensation) |
| Clamp specification and size |
| item | parameter |
| Clamp type | Polymer clamp |
| Pic |  |  |  |
| Alligator clamp | Polymer clamp | cable feet clamp |
| Pictures are for reference only,real objects shall prevail.Choose one |
| Cabinet size/unit(W*D*H)(mm) | 30U(24”),730*600*1520 |
| Equipment pic | |
| Pictures are for reference only,real objects shall prevail. |
| Auxiliary channel | type | Temperature,voltage |
| Temp. range | -25℃~110℃ |
| Temp. range | ±1℃ |
| Temp. resolution ratio | 0.1℃ |
| Voltage range | -5V~5V |
| Voltage accuracy | ± 0.1% of FS |
| Available auxiliary temp.channel/channel | customized(248 channel at most) |
| Available auxiliary voltage channel/channel | customized(248 channel at most) |
| Protaction condition of Auxiliary channel | ● security conditions of Auxiliary channel can be set including temperature upper/lower limit,voltage upper/lower limit and delay time,voltage difference of single cell |
| Note:incompatible with battery that has protection plate with soft start function. |
